点击图片查看大图
描述
投入式测量传感器是特别为液位测量而开发的。 由于浸润部分系统地采用不锈钢制造，因此该传感器可以毫无限制的是用于食品工业。如果进行腐蚀介质的测量，则有另一款带有 PTFE 电缆的型号。 该传感器有密封的不锈钢外壳，防护等级为 IP 68，可以在水下300米处使用。 内部通风连接的电缆可以补偿测量单元与大气之间的压力差，这样就可以实现流体静压测量了。 固定压力传感器不需要任何额外的张力缓解，因为电缆的结构能够承载最大张力达 1000N。通过螺栓可以固定额外重物来增加传感器的重量。 传感器独立于主电源工作，可以在6伏的供电电压下运行。 T该传感器可以配备避雷保护。它还装可以装备一个 PT 100 传感器来测量介质温度。 投入式压力传感器满足 EN 61326 的电磁兼容性（EMC）要求。
Features
O Compact design
O Protection type IP 68 (up to 300m depth) O Corrosion resistant stainless steel design O PUR shealted cable with inner ventilation O tensile strength of the cable up to1000 N O Option: lightning protection
O Option: PTFE cable
O Option: temperature measurement (Pt 100)
型号选型：
|
Model |
P3233 |
P3230 |
Options 0) |
|
Pressure type |
positive gauge pressure |
||
|
Output signal |
4...20 mA, 2-wire |
4...20 mA, 2-wire 0...20 mA, 3-wire |
0...5 V, 0...10 V, 3-wire 0,5...2,5 V, 3-wire; 1) Pt 100 (DIN IEC 751), 4-wire for Model 3230 |
|
Accuracy 2) |
0,5 % of F.S. |
0,25 % of F.S 7) |
|
|
Ranges acc. to EN |
0 ... 0,25 bar to 0 ... 10 bar |
0 ... 0,1 bar to 0 ... 25 bar |
other ranges on request |
|
Sensor element |
piezoresistive |
||
|
Repeatability |
< ± 0,05 % of F.S |
||
|
Stability (annual) |
< ± 0,2 % of F.S. in rated conditions |
||
|
Pressure connection |
G ½ B with protection cap |
||
|
Wetted parts – Case 3) – protection cap – Cable |
stainless steel PA |
protection cap stainless steel or Hastelloy for Model P3230 |
|
|
PUR |
PUR, Polyolefine (shrink hose) |
for model P3230 PTFE 4) |
|
|
Overload limit |
Š 1 bar, 5x; Š 4 bar, 4x; Š 25 bar, 3,2x |
||
|
Electrical connection |
connection cable (PUR-shealted with inner ventilation, tensile strength 1000 N) |
||
|
Power supply |
10....30 VDC, (14...30 VDC for output 0...10 V) (5...30 VDC, for output 0,5...2,5 V) |
||
|
Power consumption – 4...20 mA – 0...20 mA – 0,5...2,5 V – voltage output: |
current signal current signal + 4 mA approx. 2 mA 8 mA |
||
|
Load – current output – voltage output |
Š UB – 10V – 0,14 fi* cable length 0,020A m Š 100 kOhm |
||
|
Temp. comp. range |
0....+ 50°C |
||
|
Temperature influence medium TK |
± 0,2 % /10 K, on zero and span 5) |
||
|
Response time |
< 1 ms (within 10% to 90% of F.S.) |
||
|
Emission 6) |
acc. to EN 61326 |
||
|
Interference 6) |
acc. to EN 61326 |
||
|
Protection type – depth |
IP 68 acc. to EN 60 529 / IEC 529 |
||
|
up to 100 m |
up to 300 m |
||
|
Electrical protection type |
polarity, overload and short circuit protection |
lightning protection(IEC 801-5; 1,5 kV) |
|
|
Temperature ranges – storage – medium |
-30 .... 80 °C -10 .... 50 °C |
Model P3230 -10 ... 85 °C (PTFE-cable) |
|
|
Weight – sensor – cable – additional weight |
approx. 0,18 kg approx. 0,08 kg/m approx. 0,5 kg |
approx. 0,2 kg approx. 0,08 kg/m approx. 0,5 kg |
|
1) Special signal for mains independent operation, fo r ranges 0...0,25 bar.
2)
3) Including pressure connection and diaphragm .
4) max depth 100 m
5) 0,4 % for measuring ranges 0...0,1 and 0...0,16 bar.
6) Declaration of conformity on request .
7) Measuring ranges<0,25 bar only with accuracy 0,5%
